DN15 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 4 points (DN15) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 1.1kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 25VA DC 19W | |
Material | Valve body-304 stainless steel; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
DN20 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 6 points (DN20) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 1.16kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 25VA DC 19W | |
Material | Valve body-brass; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
DN25 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 1 inch (DN25) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 1.55kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 25VA DC 19W | |
Material | Valve body-brass; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
DN32 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 1.2 inch (DN32) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 2.35kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 43VA DC 30W | |
Material | Valve body-brass; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
DN40 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 1.5 inch (DN40) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 2.45kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 43VA DC 30W | |
Material | Valve body-brass; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
DN50 | ||
Work Pressure | 0~1.OMpa | |
Take Over Caliber | 2 inch (DN50) | |
Coil Heating Up | ≤80°C | |
Connection Method | internal thread | |
Ambient Temperature | 一20~+40℃ | |
Weight | 3kg | |
Type | Normally closed | |
Action Method | Step-by-step pilot direct-acting | |
Medium Temperature | 0~80°C; 0~120°C | |
Wiring | Single-phase three-wire system, lead type, wire length 1 meter | |
Power Fluctuation | AC ±10% DC ±1% | |
Power | AC 43VA DC 30W | |
Material | Valve body-brass; coil-enameled round copper wire | |
Seal | Nitrile rubber, fluorine rubber, polytetrafluoroethylene | |
Explosion-proof Mark | Ex mb II T4 Gb、Ex mbD 21IP65 T130°C |
Contact Person : | Yamin Zhou |
---|